Black Ruthenium Bath JE12-1 - 5 g/L Ru

€419.22

Content: 1 Piece

Content

1 liter

1,5 liter

Individual quantity

Piece per 1,0l

Our payment methods:

Product number: 9706.1000

Delivery time: 1-3 days

Your advantages with Jentner

Fast shipping
Made in Germany
Secure DHL shipping

Product information "Black Ruthenium Bath JE12-1 - 5 g/L Ru"

The black ruthenium bath JE12-1 deposits dark up to grey-black ruthenium coatings. The ruthenium electrolyte preserves the brightness and it can be obtained a high colour consistency. The layers have a good grip and impress through their decorative colour. Coatings up to max 0,2-0,5 µm can be deposited. When plating non-precious metals it is recommended to use a pre-gold layer or a pre-palladium layer.

Operating data:
Ruthenium content: 5.0 g/L Ru
pH-value: 1.0 - 1.6
Density: 1.036 g/cm3

Operating conditions:
Voltage: 2,2 - 3 Volt
Bath temperature: 65°C (60 -70°C)
Exposition time: 2 min. (2 - 4 min.)
Anodes: Platinized titanium, mixes metal oxide
Agitation: required
Currency density: 0.5 - 3 A/dm2
Deposit rate: 1 - 3 mg/Amin
Deposit speed: 0.02 µm/min at 1.5 A/dm2
Bath filtration: from 10 Liter

Deposition data:
Hardness: approx. 800 HV
Layer thickness: max. 0.5 µm
Layer density: approx. 12 g/cm3

Form of delivery:

Ready for use

Hazard warnings

H314 Causes severe skin burns and eye damage.

H318 Causes serious eye damage.

Safety instructions

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER or doctor.

P501.9 Dispose of contents/container as problematic waste.

Available downloads