For galvanic processes:
Our Options for Pretreatment
Covering varnish RED JE705n (1 kg)
The covering varnish red JE705n is often used for the partial coating of jewellery pieces. It is particularly suitable for static parts such as rings. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and especially suitable for galvanic electrolytes which work with room temperature.
Covering varnish RED JE705n (100g)
The covering varnish red JE705n (100g) is often used for the partial coating of jewellery pieces. It is particularly suitable for static parts such as rings. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and especially suitable for galvanic electrolytes which work with room temperature.
Covering varnish, blue JE703 (1 kg)
The covering varnish blue JE703 is often used for the partial coating of jewellery pieces. It is particularly suitable for flexible parts, such as chains. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and also heat resistant.
Covering varnish, blue JE703 (100 g)
The covering varnish blue JE703 is often used for the partial coating of jewellery pieces. It is particularly suitable for flexible parts, such as chains. Usually it is resistant to galvanic electrolytes, salt solutions, ozonized and chlorinated water. The covering varnish is weather and water resistant and also heat resistant.
Decoction Agent JE622 (1 kg)
The JE622 decoction agent/gypsum remover is ideal for decocting soldered parts. This eliminates the annoying and dangerous work with sulphuric acid. JE622 can be rinsed off easily and the solution does not need to be brought to the boil. Operating conditions:Preparation mixture:: Dissolve 150 - 200 g of powder in 1 liter of hot tap water.Bath temperature: 60 - 80 ° C
Drum polish concentrate Delta SG (1 kg)
Delta SG is a universally applicable drum polishing concentrate. It is over 95% biodegradable and does not cause any problems in waste water treatment. It can be used in polishing drums as well as in vibrators.Bath preparation / dosageper liter of tank volume are used:20 - 40 ml drum polish concentrate Delta SG
Electrolytic Degreasing Salt JE610 (1 kg)
The degreasing salt JE610 is a degreasing agent which is free of cyanide. It is used for the cathodic degreasing of all usual metallic objects.Working conditions:Voltage: 6 - 10 VoltBath temperature: 20 - 25°CExposition time: 30 - 60sec.Anodes: Stainless steel
Electrolytic Degreasing Salt JE610 (100 g)
The degreasing salt JE610 is a degreasing agent which is free of cyanide. It is used for the cathodic degreasing of all usual metallic objects.Working conditions: Voltage: 6 - 10 VoltBath temperature: 20 - 25°CExposition time: 30 - 60sec.Anodes: Stainless steel
Etching salt JE802
Etching salt JE802 is ideal for neutralising after alkaline pre-treatment and for activating steel, copper, copper alloys and passive nickel layers. Activation with JE802 replaces the previously used acid dipping based on sulphuric or hydrochloric acid.Operating Data:Tank material: PPHBath temperature: Room temperatureDive time: ca. 10-25 secondsForm of delivery:· Salt form
OxiEx JE709 (1 Liter)
OxiEx JE709 is a water-based deoxitation agent which is used to remove sulfid and oxid layers from silver surfaces and low alloyed gold. OxiEx can can be used for different decorative and technical applications. The ready-to-use solution enables an easy handling and it is suitable for brush and dive procedures.Working conditions:Temperature: 20-30°CExposition time: 1-30 min.
OxiEx JE709 (250 ml)
OxiEx JE709 is a water-based deoxitation agent which is used to remove sulfid and oxid layers from silver surfaces and low alloyed gold. OxiEx can can be used for different decorative and technical applications. The ready-to-use solution enables an easy handling and it is suitable for brush and dive procedures.Working conditions:Temperature: 20-30°CExposition time: 1-30 min.
Polishing Compound Delta M (1 kg)
Delta -M- is a universal drum polishing concentrate. It is over 95% biodegradable and causes no problems in waste water treatment. The service life has been extended by a factor of 2 compared to other polishing agents. It can be used in trommels, as well as in vibrators and centrifugal disc machines.
Silver Conductive Lacquer JE900 (20 g)
The conductive silver laquer JE900 is used to obtain conductive coatings on non-precious metals such as glass, ceramic or wood.Please note that this article is a dangerous good according to the legal guidelines. For this reason we need a copy of your business registration and we kindly ask you to send it to us in advance.
Ultrasonic Cleaning NEUTRAL
The liquid ultrasonic cleaner Neutral is especially suitable for gold, silver, steel and metal. Neutral fulfils the legal requirements due to it's 80% biodegradability according to OECD methods. Operating conditions:Preparation mixture: 30 - 50 ml/LBath temperature: 60 - 80°CExposition time: 1 - 3 min.
Ultrasonic Cleaning Salt RAPID JE811 (1 kg)
Rapid JE811 is a highly alkaline ultrasonic cleaning agent in powder form, which is escpecially suitable for steel and gold. JE811 comes up to the demands for biodegradability of the RVO to the washing agent law. Operating conditions: Preparation mixture: 30 - 50 g/LBath temperature: 60 - 80°CExposition time: 1 - 3 min.
Ultrasonic Cleaning Salt Ultra 23
JE ULTRA 23 is a universal, powdered ultrasonic cleaning agent specifically designed for precious metals, brass, and copper. Non-ferrous metals are barely discolored or attacked. It is a mildly alkaline cleaner with good emulsifying properties.Bath concentration: 50 g/L (45 - 60)Temperature: 60 °C (50 - 70)Exposure time: 60 - 180 secondsForm of delivery:Salt form
Ultrasonic Cleaning Solution VP17
The liquid ultrasonic cleaning concentrate VP17 is especially suitable for gold, silver, steel and metals. VP17 fulfils the legal requirements due to it's 80% biodegradability according to OECD methods. Working conditionsPreparation mixture: 10 - 20 ml/LBath temperature: 60 - 80°CExposition time: 1 - 3 min.
Products for electroplating pre-treatment