Black rhodium bath JE23-1 GO! - 2 g/L Rh

€643.03

Content: 1 Piece

Content

1 liter

1,5 liter

Individual quantity

Piece per 1,0l

Our payment methods:

Product number: 9621.1000

Delivery time: 1-3 days

Your advantages with Jentner

Fast shipping
Made in Germany
Secure DHL shipping

Product information "Black rhodium bath JE23-1 GO! - 2 g/L Rh"

The black rhodium bath JE23-1 deposits dark anthracite-grey, particular decorative rhodium coatings. The layers are very abrasion resistant, colour consistent and uniform. The electrolyte is preferably used for decorative coatings in the jewellery and eyewear industry. JE23-1 is characterized by it's easy handling and usability. It works at room temperature so a time and energy intensive heating-up can be omitted. Coatings up to 0,5 µm can be deposited.

Operating Data:
Rhodium content: 2,0 g/L Rh
pH-Value: <1
Density: 1,02 – 1,07 g/cm3

Working conditions:
Voltage: 2 - 3 Volt
Bath temperature: 20 - 27°C
Exposition time: 2 min. (1 - 5 min.)
Anodes: Platinized titanium, mixed-metal-oxide
Anode/ Cathode: 1:1
Current density: 1,0 - 1,5 A/dm2
Agitation: required

Deposition rate: 6 - 8mg/Amin
Bath filtration: ab 10 Liter

Deposition Data:
Hardness: 300 - 370 HV
Layer thickness: max. 0,5 μm
Layer density: ca. 10,5 g/cm3

Form of delivery:
Ready for use

Hazard warnings

H314 Causes severe skin burns and eye damage.

H318 Causes serious eye damage.

H412 Harmful to aquatic life with long lasting effects.

Safety instructions

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER or doctor.

P501.9 Dispose of contents/container as problematic waste.

Available downloads