Skip to main content Skip to search Skip to main navigation

New shop URL: shop.jentner.de → jentner-plating.com

Safe shipping with DHL
fast shipping
Made in Germany

Copper Bath (acid) JE540

Product information "Copper Bath (acid) JE540"

The copper bath (acid) JE540 is a universally applicable electroplating electrolyte. It is suitable for frame and barrel plating. Because of its excellent throwing power and adehesive strength the electolyte is often used as an under coat before further electroplating processes. The copper layers are fine-grained and slightly bright and create a very good adhesion between base material and final layer.

Operating data:
Copper content: 55 g/L (45 – 65)
Sulfuric acid content: 60 g/L (55 – 75)
Chloride content: 70 mg/L (50 – 100)
pH-value: < 1

Operating conditions:
Voltage: 1,6-3 Volt
Current density: 1 - 6 A/dm²
Bath temperature: 20-30 °C
Exposition time: 2-15 min.
Anodes: copper
Goods movement: required
Bath filtration: from 10 liter
Tank material: PPH, PP or PE

Deposition data:
Hardness: approx. 220 HV
Layer density: 8.9 g/cm³
 
Please note that this article is a dangerous good according to the legal guidelines. For this reason we need a copy of your business registration.
Therefore we kindly ask you to send us the business registration in advance.
Hazard warnings

H314 Causes severe skin burns and eye damage.

H318 Causes serious eye damage.

H400 Very toxic to aquatic life.

H411 Toxic to aquatic life with long lasting effects.

Safety instructions

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301+330+331 jentner.statements.P301+330+331

P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

P305+351+338 jentner.statements.P305+351+338

P310 Immediately call a POISON CENTER/doctor/…

P501.9 jentner.statements.P501.9