Cyanide Copper Bath JE550

€28.10

Content: 1 Piece

Content

1 liter

1,5 liter

Individual quantity

Piece per 1,0l

Our payment methods:

Product number: 594.1000

Delivery time: 1-3 days

Your advantages with Jentner

Fast shipping
Made in Germany
Secure DHL shipping

Product information "Cyanide Copper Bath JE550"

The Cyanide Copper Bath JE550 is suitable for frame and barrel plating. Because of its excellent throwing power and adehesive strength the electolyte is often used as an under coat before further electroplating processes. The copper layers are fine-grained and slightly bright and create a very good adhesion between base material and final layer.

Operating data:
Copper: 35 g/l Cu
Potassium cyanide: 25-35 g/L KCN free
pH-value: 11 - 12

Operating conditions:
Voltage: 0,5-3 Volt
Bath temperature: 50-60 °C
Exposition time: 2-15 min.
Anodes: copper
Anode/Cathode surface: 1 : 1

Agitation: required

Current density: 1 - 3 A/dm2

Bath filtration: from 10 liters

Hazard warnings

H300 Fatal if swallowed.

H310 Fatal in contact with skin.

H330 Fatal if inhaled.

H315 Causes skin irritation.

H319 Causes serious eye irritation.

H373 May cause damage to organs through prolonged or repeated exposure.

H411 Toxic to aquatic life with long lasting effects.

Safety instructions

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P284 [In case of inadequate ventilation] wear respiratory protection.

P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER or doctor.

P501.9 Dispose of contents/container as problematic waste.

Available downloads