Perfect pre-treatment with

conductive lacquer

Our silver conductive lacquer can also be used to electroplate non-conductive materials such as glass, ceramic or wood. It creates a conductive layer and enables further coating with any desired electrolyte.

Silver Conductive Lacquer JE900 (20 g)

The conductive silver laquer JE900 is used to obtain conductive coatings on non-precious metals such as glass, ceramic or wood.Please note that this article is a dangerous good according to the legal guidelines. For this reason we need a copy of your business registration and we kindly ask you to send it to us in advance.

€112.72

Conductive layers thanks to our conductive lacquer

As not all materials, such as glass, ceramics or wood, are conductive, they must first be made conductive so that they can then be surface-coated. How is this possible? With our silver conductive lacquer. This creates a conductive layer when applied to non-metals, which then makes surface coating possible.

For a good end result, it is only important to work extremely thoroughly. The paint must be shaken well and must dry out well after application, depending on the thickness of the layer. You should give the paint 15-30 minutes to do this. Then you will get the result that was worth the preparatory work.

*Please note that our products may only be supplied to resellers, professional users or public research, research or educational institutions. For this reason, we require a copy of your business registration or extract from the commercial register in advance.

Perfect pre-treatment with

conductive lacquer

Filter products

Silver Conductive Lacquer JE900 (20 g)

Conductive layers thanks to our conductive lacquer